[8], The filter element pouches on the mask were closed with a series of plastic dumbbell-shaped buttons and buttonholes in the rubber of the face blank and nose cup assemblies. The modification to the suit being the removal of the built-in hood, which allowed the ABC-M6A2 Field Protective Mask Hood to be used. The solutions were designed to neutralize both nerve and blister agents on the skin, but in an emergency, could be used to decontaminate individual equipment. [3] The chromium VI additives are a known carcinogen, but the filters are considered safe for use as long as the filters are in good repair. These include: Similar to the ABC-M17 but made of a light grey rubber and a different outlet valve cover assembly. ! Green Laser Protection Eyelenses Outserts, M13 Individual Decontaminating And Re-Impregnating Kit, Edgewood Chemical Biological Center 85th Anniversary Flyer, Field Manual 3-8, Chemical Reference Handbook, Page. The M17 series mask design was copied in at least four countries. The filter elements were designated M13 and were improved over time to the M13A1 and M13A2. If for a living display...remove the filter? quarter); "12" - the year of manufacture (in this case, additional cartridge made ​​in 2012); Labelling must be clear, no correction, the vagueness and traces of ink are not allowed. This theoretically overpressurized the hood to make the infiltration of chemical warfare agent vapors less likely. The M17 series of protective masks were a series of field protective respirators designed for the United States military in the early 1960s and used through the middle 1990s when it was officially phased out with the introduction of the new M40 series protective mask. The filters are named M13A2. New design requirements were drawn up for a compact design that did not have external filter canisters or hose-connected filter elements. This specimen is from the Texas Ranger Museum in Waco, Texas. The new mask came new features; the addition of the drinking system and the addition of the resuscitation system. The M17 has appeared in some postapocalyptic art and comics throughout the 1970s and 1980s. No markings whatsoever. M17A2s were made by MSA although it is possible that other companies did manufacture the M17. It can also be used for filtering other particulates including tear gas. Although unsightly, the bloom does not indicate damage to the function of the mask. The hood could be worn in one of two configurations; summer and winter. This is NOT made for any Israeli or Russian gas mask. CRAIG PICKRALL FIELD & PERSONAL GEAR SECTION, US MILITARIA FORUM - COLLECTORS PRESERVING HISTORY. The ampule was broken and massaged into the powder to help identify heavily contaminated areas of clothing. This condition may result in a compromised seal which rendered the mask unusable. The kit also contained larger bags containing calcium hypochlorite powder for decontaminating clothing and equipment or for re-impregnating clothing. The carrier had the nomenclature of the mask and often the Chemical Corps insignia stenciled on the side of the carrier. Due to the long service life of the M17 series masks, the distinctive image of that mask diffused into popular culture, arts, and entertainment.

Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. The U.S. doctrine at that time allowed for the use of chemical weapons in a retaliatory capacity (this was before the 1997 Chemical Warfare Convention)[19], however, coded diplomatic language made it clear that the use of chemical weapons by the Iraqis may trigger the use of nuclear weapons by the United States. Does the M17 line of gas masks (mostly the M17A2, as that is the mask I have) have any dangers I should know about, like dangerous filters or … Press J to jump to the feed. This purpose for the extra-small M17A2 was eventually phased out when the extra small M45 was fielded as part of the Land Warrior program.

Recommended Posts. The bag was stored folded in a pouch inside the main compartment of the mask carrier. A "Time" commemorative book of the First Gulf War featuring Soldiers with the M17A2 protective mask. The powder had a small ampule filled with a substance that changed color when in contact with chemical agents. These Soldiers were nicknamed "Tunnel Rats" and captured the imagination of the public.

The bloom may be simply washed off with mild soap and warm water. The M17A2 also has the exterior tilt (rotary) lever for the drinking tube. The product fit perfectly and is very well constructed and undamaged. Powered by Invision Community.

One such variant was the XM27[4] created in 1966. The filter elements came in white airtight, vacuum-packed paper/foil laminated bags with labels indicating the filter nomenclature.

they have chromium, but everyone freaks out for no reason, there is almost no danger posed by the amounts of chromium that is in those filters if it even was leaking. AR15.COM is the world’s largest firearm community and is a gathering place for firearm enthusiasts of all types.

Make sure to follow the rules and enjoy your time here! [12] The hood had a plastic fastener for the neck strap similar to the M4 hood for the M9A1 mask. Earlier prototype model, possibly an E13R8. [20]  Why would a goon need a gas mask when it is clear that there is no respiratory threat and wearing one would hamper physical performance? As newer models of the M17 were introduced, the old ABC-M17s migrated to law enforcement agencies where the advanced features of later models were not as important for simple crowd control with tear gases. The tape is part of a six VHS tape set, published in 2001 by Dr. Ed Hindson and the Jerry Falwell Industries. Does the M17 line of gas masks (mostly the M17A2, as that is the mask I have) have any dangers I should know about, like dangerous filters or dangerous materials? You can still see all customer reviews for the product. Gas Mask and Respirator Wiki is a FANDOM Lifestyle Community. brass fasteners. M17A2 with hood rolled during MOPP gear exchange exercise. The M17 series of protective masks were a series of field protective respirators designed for the United States military in the early 1960s and used through the middle 1990s when it was officially phased out with the introduction of the new M40 series protective mask. The eye lenses on the MP-4 are slightly farther apart when compared to the original M17. M17A1 with the green laser protection outserts. The subject of filter safety can be a controversial topic between collectors, and is often the subject of extended debate. C2 40 MM S-10 (Gasmask) OEM 40 MM Filter (Only those designated as "L12A1" are dangerous) M13A2 filters for the M17 (contain chromium) earlier models may be safe British civil filters from the WW2 era (contain blue asbestos and arsenic) M10A1 Filters for U.S. Lightweight Service and Tank Gas Masks (contain asbestos, chromium, those marked with 'FILTER INSERT INSTALLED' are safe) GP-5 filters(contain asbestos) German VM-37 and VM-40 filters (contain asbestos)

[8] Each wipe was labeled as either "1" or "2." Reviewed in the United States on January 16, 2020, Great Product, Brand New, Fits Perfect [10/10], Reviewed in the United States on April 2, 2020.

A direct clone of the M17. The mask was stored in the carrier with eye lenses facing the opening of the carrier and the hood stored inside out to facilitate the rapid donning of the mask. production (in this case, additional cartridge ACF-3 is made ​​in the second Hope this helps! Its inlet filter valve covers are threaded as opposed to the "snap-on" version of the original M17 series mask.

From my previous research, the M13 series of filters contain no asbestos. M17A2 filters in its orginal sealed bag. If it's for display..ehhh...any filter is fine. Please could you NOT ask any more questions on the topic of filter safety here. From the 1970s onwards, its dangers became well publicised, and its use declined sharply, being ultimately outright banned in many countries.

At the bottom of the additional cartridge DPG-3 is marked as follows. Prime members enjoy FREE Delivery and exclusive access to music, movies, TV shows, original audio series, and Kindle books. Manufacturer stamps on the M17A2 can be found in two locations, one is near the right eyepiece with the manufacturer's name and year of manufacture and the second (almost hidden) mark is on the right side of the inner end of the nose cup assembly facing the internal filter compartment. The drinking system designed for the M17A1 is believed to be the first in the world, followed shortly thereafter by British and German designs. The M17 Protective Mask is a series of gas masks that were designed and produced in 1959 (as a replacement of the M-9 gas mask) to provide protection from all types of known chemical and biological agents present. A color comparison bar chart is printed inside the front cover. Then look at the most common ways to fake (falsification) additional cartridge ACF-3. Take your favorite fandoms with you and never miss a beat. AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.